The Corn Snake Forum
The Corn Snake Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Corn Snake Posts
 Corn Snake - General Keeping information
 New glass viv-is temperature ok?
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Remmy
Sub Adult

United Kingdom
1188 Posts

Posted - 15/05/2009 :  13:46:29  Show Profile
Got my glass viv set up with a heat mat underneath. I have a temperature on the glass bottom off 85.5 but on top off the substrate it is only 76.5. Is this ok or do i make the glass 90 degress which i thought might be too hot and the substrate 80 degrees. Also the cool end is only 66.7 degrees,is this too cold and if so how do i raise the temp in the cool end. Thanks for any advice.

matty18714
The Count of Corniness

United Kingdom
4428 Posts

Posted - 15/05/2009 :  16:22:56  Show Profile
I would reduce the level of substrate on the hot side until the snake is almost on the glass (keeping the temp the same). As for upping the cool end, maybe moving it to a warmer room?

Go to Top of Page

Remmy
Sub Adult

United Kingdom
1188 Posts

Posted - 15/05/2009 :  20:22:05  Show Profile
I have only put 1cm of substrate over the heat mat. Believe it or not matty it is in the warmest room, maybe i should move to an igloo lol.
Go to Top of Page

matty18714
The Count of Corniness

United Kingdom
4428 Posts

Posted - 15/05/2009 :  22:21:13  Show Profile
In that case I would totaly level the substrate in the hot end so there is almost nothing there. I wouldnt worry to much about the cool end temp.

Go to Top of Page

gingerpony
Queen Bee

United Kingdom
10455 Posts

Posted - 17/05/2009 :  16:33:38  Show Profile  Click to see gingerpony's MSN Messenger address
try using a sheet of newspaper as substrate at the hot end

cornsnakes, ratsnakes, bullsnakes, boas and day geckos

Location:Leeds/York/Selby area
Go to Top of Page

Remmy
Sub Adult

United Kingdom
1188 Posts

Posted - 17/05/2009 :  19:34:18  Show Profile
Ok I have levelled the substrate to nearly nothing, just barely covering the glass and the temps are now 87 on the glass and 80 on the substrate so i think this is now ok. Thank you matty and gingerpony
Go to Top of Page

gingerpony
Queen Bee

United Kingdom
10455 Posts

Posted - 17/05/2009 :  20:11:14  Show Profile  Click to see gingerpony's MSN Messenger address
no worries, i've been having a similar headache myself with a big move around into the new stacks, turns out one of the therms is faulty, i'm not going mad after all!!!

cornsnakes, ratsnakes, bullsnakes, boas and day geckos

Location:Leeds/York/Selby area
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Topic Locked
 Printer Friendly
Jump To:
The Corn Snake Forum © 2000-11 thecornsnake.co.uk Go To Top Of Page
Snitz Forums 2000