| Author |
 Topic  |
|
|
hiper2009
Banned
United Kingdom
2197 Posts |
 Posted - 15/03/2010 : 19:14:39
|
On your viv building of this link http://www.thecornsnake.co.uk/forum/topic.asp?ARCHIVE=true&TOPIC_ID=1763 on the last pic which is your guide on the piece of wood that shows 60cm by 34cm why is this different to the 60cm by 38cm im guessing its the backbord but why is it 4cm's smaller then the other two pieces  or is this a mistake ? |
0.0.0 Royal Python Het Pied 100% CB10 - Chaos
1.1.0 Brazilian Rainbow Boa CB10 - Bow/Mayhem
0.1.0 Cornsnake Amel Het Motley CB10 - Fire
1.0.0 Cornsnake Caramel Het Motley CB09 - Whisky
1.0.0 Cornsnake Snow Het Stripe CB07 - Romeo - R.I.P
1.0.0 Super Golden Labrador Dog CB02 - Bailey
Wish List:
1.2.0 Royal Python - Pastel , Pinstripe , Lesser. |
|
|
solid
Hatchling
United Kingdom
428 Posts |
Posted - 15/03/2010 : 19:29:48
|
| i would asume the 34 is the back board alowing for thickness, looking at the picture its "inside" what would be top and bottom |
3.1.1 corns - solid,liquid,ocelot,fox + raiden / 0.0.1 missing MBK - raven
PS3id: adam83 |
 |
|
|
lee2308
The Corn Snake Moderator
United Kingdom
3348 Posts |
Posted - 15/03/2010 : 19:31:58
|
| daz has'nt mentioned how thick the wood is,what ever the thickness off your wood is,double it then take that away from the height of the back panel because you have to take the top and bottom into consideration,hope you understand that lol |
  |
|
|
|
lee2308
The Corn Snake Moderator
United Kingdom
3348 Posts |
Posted - 15/03/2010 : 19:32:33
|
solid beat me to it
|
|
|
|
|
hiper2009
Banned
United Kingdom
2197 Posts |
Posted - 16/03/2010 : 13:23:06
|
Oh right , Im changing the guide so how he has a 60cm length viv which is 2ft i'm changing it to 90cm = 3ft.
Im going to buy this type of wood and size : Conti Board White (L)2440 x (W)610 x (T)15mm
So the thickness of the wood im buying is 15mm which is about 1.5cm will i need to change the middle size bord (i think the backbord) which has 90cm by 34cm or do i change this back to 90cm by 38cm ?? |
0.0.0 Royal Python Het Pied 100% CB10 - Chaos
1.1.0 Brazilian Rainbow Boa CB10 - Bow/Mayhem
0.1.0 Cornsnake Amel Het Motley CB10 - Fire
1.0.0 Cornsnake Caramel Het Motley CB09 - Whisky
1.0.0 Cornsnake Snow Het Stripe CB07 - Romeo - R.I.P
1.0.0 Super Golden Labrador Dog CB02 - Bailey
Wish List:
1.2.0 Royal Python - Pastel , Pinstripe , Lesser. |
|
|
|
lee2308
The Corn Snake Moderator
United Kingdom
3348 Posts |
Posted - 16/03/2010 : 18:04:40
|
| the back board should measure 90x35 if your using 15mm wood |
|
|
|
|
Blackecho
The Corn Snake Admin
United Kingdom
4379 Posts |
Posted - 16/03/2010 : 20:56:01
|
quote:
Originally posted by hiper2009
So the thickness of the wood im buying is 15mm which is about 1.5cm
Almost exactly  |
 
www.theroyalpython.co.uk/forum
Location: Rotherham
|
|
|
|
eeji
The Morph Master
United Kingdom
4335 Posts |
Posted - 16/03/2010 : 22:00:15
|
quote:
Originally posted by hiper2009
Oh right , Im changing the guide so how he has a 60cm length viv which is 2ft i'm changing it to 90cm = 3ft.
Im going to buy this type of wood and size : Conti Board White (L)2440 x (W)610 x (T)15mm
So the thickness of the wood im buying is 15mm which is about 1.5cm will i need to change the middle size bord (i think the backbord) which has 90cm by 34cm or do i change this back to 90cm by 38cm ??
15mm is about 9/16 isn't it?  |
Forum - Guide to Cornsnake Morphs - Punnett Square Calculator - Breeder Directory
|
|
|
|
hiper2009
Banned
United Kingdom
2197 Posts |
Posted - 17/03/2010 : 10:37:33
|
quote:
Originally posted by lee2308
the back board should measure 90x35 if your using 15mm wood
Ok so i need to make it 90 by 35 does this mean on my side bords will that stay at 38 or will that need to be changed ? |
0.0.0 Royal Python Het Pied 100% CB10 - Chaos
1.1.0 Brazilian Rainbow Boa CB10 - Bow/Mayhem
0.1.0 Cornsnake Amel Het Motley CB10 - Fire
1.0.0 Cornsnake Caramel Het Motley CB09 - Whisky
1.0.0 Cornsnake Snow Het Stripe CB07 - Romeo - R.I.P
1.0.0 Super Golden Labrador Dog CB02 - Bailey
Wish List:
1.2.0 Royal Python - Pastel , Pinstripe , Lesser. |
|
|
|
hiper2009
Banned
United Kingdom
2197 Posts |
Posted - 17/03/2010 : 10:38:16
|
quote:
Originally posted by eeji
quote:
Originally posted by hiper2009
Oh right , Im changing the guide so how he has a 60cm length viv which is 2ft i'm changing it to 90cm = 3ft.
Im going to buy this type of wood and size : Conti Board White (L)2440 x (W)610 x (T)15mm
So the thickness of the wood im buying is 15mm which is about 1.5cm will i need to change the middle size bord (i think the backbord) which has 90cm by 34cm or do i change this back to 90cm by 38cm ??
15mm is about 9/16 isn't it?
Im not sure  |
0.0.0 Royal Python Het Pied 100% CB10 - Chaos
1.1.0 Brazilian Rainbow Boa CB10 - Bow/Mayhem
0.1.0 Cornsnake Amel Het Motley CB10 - Fire
1.0.0 Cornsnake Caramel Het Motley CB09 - Whisky
1.0.0 Cornsnake Snow Het Stripe CB07 - Romeo - R.I.P
1.0.0 Super Golden Labrador Dog CB02 - Bailey
Wish List:
1.2.0 Royal Python - Pastel , Pinstripe , Lesser. |
|
|
|
lee2308
The Corn Snake Moderator
United Kingdom
3348 Posts |
Posted - 17/03/2010 : 16:51:50
|
| the sides stay the same (38cm) |
|
|
|
|
Kare
Egg
86 Posts |
Posted - 17/03/2010 : 20:02:53
|
| Sorry to be female, but which lay out allows those bits to be cut from that size plank, I understand the layout illustrated is the old one and would not work. |
 |
|
|
|
hiper2009
Banned
United Kingdom
2197 Posts |
Posted - 17/03/2010 : 20:29:55
|
quote:
Originally posted by lee2308
the sides stay the same (38cm)
Ok thanks Lee.  |
0.0.0 Royal Python Het Pied 100% CB10 - Chaos
1.1.0 Brazilian Rainbow Boa CB10 - Bow/Mayhem
0.1.0 Cornsnake Amel Het Motley CB10 - Fire
1.0.0 Cornsnake Caramel Het Motley CB09 - Whisky
1.0.0 Cornsnake Snow Het Stripe CB07 - Romeo - R.I.P
1.0.0 Super Golden Labrador Dog CB02 - Bailey
Wish List:
1.2.0 Royal Python - Pastel , Pinstripe , Lesser. |
|
|
|
solid
Hatchling
United Kingdom
428 Posts |
Posted - 17/03/2010 : 20:34:09
|
| you`d better rethink those plans - you can`t get a 90cm strip from a 61cm wide board |
3.1.1 corns - solid,liquid,ocelot,fox + raiden / 0.0.1 missing MBK - raven
PS3id: adam83 |
|
|
|
hiper2009
Banned
United Kingdom
2197 Posts |
Posted - 17/03/2010 : 21:02:31
|
quote:
Originally posted by solid
you`d better rethink those plans - you can`t get a 90cm strip from a 61cm wide board
Oh Solid you have confused me big time now i don't know where you mean 
EDIT : The size of wood im going to be buying is Conti Board White (L)2440 x (W)610 x (T)15mm |
0.0.0 Royal Python Het Pied 100% CB10 - Chaos
1.1.0 Brazilian Rainbow Boa CB10 - Bow/Mayhem
0.1.0 Cornsnake Amel Het Motley CB10 - Fire
1.0.0 Cornsnake Caramel Het Motley CB09 - Whisky
1.0.0 Cornsnake Snow Het Stripe CB07 - Romeo - R.I.P
1.0.0 Super Golden Labrador Dog CB02 - Bailey
Wish List:
1.2.0 Royal Python - Pastel , Pinstripe , Lesser. |
Edited by - hiper2009 on 17/03/2010 21:12:20 |
|
|
|
solid
Hatchling
United Kingdom
428 Posts |
Posted - 17/03/2010 : 21:27:58
|
his 60cm was the width of his plank which he made the long part of the viv - 2 feet, so if you got the 240x61 its slightly longer but the same wide, you wont be able to get 3 feet out of a piece of wood thats 2 feet basicly.
you need 2 of these to make a 3 foot long and up to 18 inches high and deep
its in CMs. 45 is just under 18", change the 45 to 38 for 15" |
3.1.1 corns - solid,liquid,ocelot,fox + raiden / 0.0.1 missing MBK - raven
PS3id: adam83 |
Edited by - solid on 17/03/2010 21:55:35 |
|
|
|
dazb
The Corn Snake Moderator
United Kingdom
1278 Posts |
Posted - 18/03/2010 : 13:06:06
|
Sorry I havent answered before.
I used 18mm conti bored and it is smaller because it fits inside the top,bottom and sides that is why it end up smaller by 4cm.
I did make a 3x2x2 but it was made out of 2 boards. |
 |
|
|
|
solid
Hatchling
United Kingdom
428 Posts |
Posted - 18/03/2010 : 23:35:32
|
| and i made a double stack with 3 boards - 3`x15"x15" |
3.1.1 corns - solid,liquid,ocelot,fox + raiden / 0.0.1 missing MBK - raven
PS3id: adam83 |
|
|
|
hiper2009
Banned
United Kingdom
2197 Posts |
Posted - 19/03/2010 : 20:33:57
|
quote:
Originally posted by solid
and i made a double stack with 3 boards - 3`x15"x15"
Where did you buy the bords from ? |
0.0.0 Royal Python Het Pied 100% CB10 - Chaos
1.1.0 Brazilian Rainbow Boa CB10 - Bow/Mayhem
0.1.0 Cornsnake Amel Het Motley CB10 - Fire
1.0.0 Cornsnake Caramel Het Motley CB09 - Whisky
1.0.0 Cornsnake Snow Het Stripe CB07 - Romeo - R.I.P
1.0.0 Super Golden Labrador Dog CB02 - Bailey
Wish List:
1.2.0 Royal Python - Pastel , Pinstripe , Lesser. |
|
|
|
solid
Hatchling
United Kingdom
428 Posts |
Posted - 24/03/2010 : 18:21:50
|
i know this is a week old now but i got mine from b+q, or at least a carpenter friend did. but i have the wood effect panels which for some reason are twice the price of equivilant sized white faced panels. also they only came in 2 meter length so mine is 2.5 foot not 3 like i said before.
the plans i had are on the old virus`d comp so i`ll make a pic on Paint if i can remember how it went.
*pic edit
 |
3.1.1 corns - solid,liquid,ocelot,fox + raiden / 0.0.1 missing MBK - raven
PS3id: adam83 |
Edited by - solid on 25/03/2010 19:25:32 |
|
|
| |
Topic |
|
Help Dazb
