| Author |
 Topic  |
|
|
Regalmatt
Egg
United Kingdom
87 Posts |
 Posted - 24/08/2011 : 21:00:11
|
Hi guys, I've been trawling the Internet for info on the correct way to heat a glass bottomed viv... So many different opinions!
Would I be right in saying that the mat should be on the outside of viv, directly on top of the cabinet,then a 5mm air gap for circulation, then the glass? Please help as I'm In the process of setting up and want to do it right!
Cheers, matt. |
|
|
tordyjo
Fully Grown Corn
United Kingdom
2036 Posts |
Posted - 24/08/2011 : 21:41:01
|
| I have a glass viv and my mats inside, haven't had a problem, just make sure you have your thermometer and thermostat probes on top of the mat |
 Lilly Crystal Harry
1.2.0 corns, 1.1.0 cats tropical guppies who continually breed
|
 |
|
|
tarotpodge
Hatchling
433 Posts |
Posted - 24/08/2011 : 21:55:49
|
| I also have glass viv and heat mat is inside the viv. Had no problems. |
2.0.3 Corns, Creamsicle(Phoenix), Ghost motley(Savanna), 2x carolina(Indiana+Severus), Amel stripe (Frazzle).
0.3.0 Dogs, Shar pei cross, Staff and Dalmation 0.3.0 Cats 2.0.0 Chinchillas 7.11.23 Tropical fish 1.0.0 Iguana |
|
|
|
Regalmatt
Egg
United Kingdom
87 Posts |
Posted - 24/08/2011 : 22:15:15
|
| Thanks for quick replies guys, are your mats sat directly on top of glass?can u give me product names/ brands please? |
|
|
|
tordyjo
Fully Grown Corn
United Kingdom
2036 Posts |
Posted - 24/08/2011 : 22:54:09
|
| my mat is directly on top of the glass, and sorry can't remember what brand they are |
LillyCrystalHarry
1.2.0 corns, 1.1.0 cats tropical guppies who continually breed
|
|
|
|
Kehhlyr
ǝʞɐɔ sǝʌoן
United Kingdom
8173 Posts |
Posted - 24/08/2011 : 23:53:04
|
Most heat mats can go either inside or outside the viv, the only exception to this rule is the komodo mats (so I believe), they specify that they need at least a 5mm air gap.
So long as the mat has the thermostat probe inside the viv then there's no chance of the mat overheating.
I have heat mats under a couple of glass vivs at the moment, I have it like so:
Cabinet, sheet of polystyrene, heatmat, glass viv.
I use the polystyrene for 2 reasons, firstly it's insulating so directs all the heat from the mat upwards making it more efficient at heating, secondly the polystyrene allows for the cable connector on the mat to squash into it a bit so it's not constantly getting pressed between cabinet/glass bottom.
You can just trim the bit of poly sheet a bit to allow for a little bit of space for the connector then as well. |
-=Kehhlyr - The Resident Loon
  |
|
|
| |
Topic |
|
Heating and glass!!!!!
