The Corn Snake Forum
The Corn Snake Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
 All Forums
 Corn Snake Posts
 Corn Snake - General Keeping information
 heat mat

Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!

Screensize:
UserName:
Password:
Format Mode:
Format: BoldItalicizedUnderlineStrikethrough Align LeftCenteredAlign Right Horizontal Rule Insert HyperlinkInsert EmailInsert Image Insert CodeInsert QuoteInsert List
   
Message:

* HTML is OFF
* Forum Code is ON
Smilies
Smile [:)] Big Smile [:D] Cool [8D] Blush [:I]
Tongue [:P] Evil [):] Wink [;)] Clown [:o)]
Black Eye [B)] Eight Ball [8] Frown [:(] Shy [8)]
Shocked [:0] Angry [:(!] Dead [xx(] Sleepy [|)]
Kisses [:X] Approve [^] Disapprove [V] Question [?]

 
   

T O P I C    R E V I E W
n/a Posted - 21/04/2010 : 21:16:59
Hi everyone, I have a thin layer of Aspen on the heat mat but have just noticed that while sfa is moving around he is shifting the Aspen and coming into contact with the heat mat, will this hurt him or is it safe???
steve
5   L A T E S T    R E P L I E S    (Newest First)
Kellog Posted - 22/04/2010 : 09:05:46
Must echo what has been said here....especially the bit about weighing the probe down and making sure the stat is monitored using a digital thermometer.

I have both and my snake, Silvesta, has managed to push the probe up so it is pointing sky-high. This meant that the heatmat continued to heat up and if I hadnt had the digital thermometer I wouldnt have realised it. Luckily I saw that it was showing 30oC and immediately investigated and found out the reason for the high temp. Both probes for the stat and thermometer are now weighed down with a rock and surrounded with stones (as his warm end hide is not a heavy one)....but I always check is as he still sometimes manages to move the stones around and dislodge the probes.

If I hadnt had a digital thermometer I would have had no idea that the heatmat had got so hot - so it really is a necessity.

xxx

DannyBrown91 Posted - 21/04/2010 : 23:04:38
Aslong as it is statted and you monitor the temps with a digital therm he'll be ok.
elament Posted - 21/04/2010 : 21:47:19
Ok but have you got it set up correctly? Even with a stat it is possible for the heat mat to get very hot. THe probe for the stat needs to be in direct contact with the surface of the mat laying flat for it to work properly. It is advisable if you have a digital thermometer to attach the probes for the stat and thermometer together using rubber bands and have them both laying flat on the surface of the mat. That way you can tell exactly what temp the mat is putting out and keep it below 30c and so not harmful to snake. Word of warning make sure you weigh the probes down with something heavy to stop snake from moving them.

Hope that helps

Steve
n/a Posted - 21/04/2010 : 21:26:05
yes I have a stat thanks for that was a little concerned
elament Posted - 21/04/2010 : 21:20:36
No if the mat is controlled by a correctly set thermostat.

Do you have a stat?

The Corn Snake Forum © 2000-11 thecornsnake.co.uk Go To Top Of Page
Snitz Forums 2000