| T O P I C R E V I E W |
| esox |
Posted - 10/02/2011 : 08:08:36
when I disinfect my new faun and hides, bowls etc, do I just spray and dry? or do I need to rinse them with water afterwards? I'm using cascade disinfectant, just a bit worried dont want to hurt snakey once |I get him/her. also if you do rinse with water, is normal tap water ok?
thanks
John |
| 4 L A T E S T R E P L I E S (Newest First) |
| esox |
Posted - 10/02/2011 : 11:38:50
thanks for advice |
| lee2308 |
Posted - 10/02/2011 : 10:44:44
depends on what your using,but i would rinse water bowls just to be on the safe side. |
| Sta~ple |
Posted - 10/02/2011 : 10:18:03
I've used this spray, I just spray, wipe and let it dry for my viv and hides. With bowls I spray and rinse with water just to be on the safe side and I just use normal tap water. |
| n/a |
Posted - 10/02/2011 : 09:05:10
When i buy anythng new, i spray with disinfectant, rinse with tap water, and then dry off with kitchen roll. I have a separate RUB that i use to was snakie stuff in. As for Viv, when doing full clean once free of substrate spray and wipe over with a damp cloth and allow to dry before replacing viv decorations etc.. Tap water is fine, especially as this is what they get to drink. |
