| Author |
 Topic  |
|
|
misspiggy18
Hatchling
United Kingdom
143 Posts |
 Posted - 24/05/2010 : 18:36:20
|
i got a surprise when i got back from college today my mom's boss had given her this fish tank with contents for free im chuffed its huge and i love the tree root plastic hide. this was for the boss son but he never used it so a good srub and i think its great what do you think
|
2.0.0 corn snakes (Vinnie and Leo)
1.1.0 cats ( jayda and thomas)
 
|
|
|
Kehhlyr
ǝʞɐɔ sǝʌoן
United Kingdom
8173 Posts |
Posted - 24/05/2010 : 18:52:02
|
It's useless, I can recycle them though so if you send it to me..........
Seriously, that's a good little tank and as you said a good scrub and lid modification and you'd be good to go.
Obviously depending on what rep and what size rep you decide to use will also let you know if it needs sides covering etc as well. |
-=Kehhlyr - The Resident Loon
  |
 |
|
|
misspiggy18
Hatchling
United Kingdom
143 Posts |
Posted - 24/05/2010 : 18:56:53
|
| im using it for a corn snake baby the baby will be a couple of months old so i think it might be a tad big to start with so it will come in handy when he grows |
2.0.0 corn snakes (Vinnie and Leo)
1.1.0 cats ( jayda and thomas)
|
|
|
|
reptiledanny
Sub Adult
United Kingdom
1809 Posts |
Posted - 24/05/2010 : 18:57:39
|
depending on the reptile you put in there you will have to make a lid for it aswell. i used an old fish tank for monty but made my own lid but he escaped and i never will use a fish tank again for him or any snake but thats my point of view
good luck with it and what a bargain |
1.1 royal pythons 0.1 hog island boa 1.0 corn snake
sig made by stapey |
|
|
|
Mouse
Yearling
United Kingdom
958 Posts |
Posted - 24/05/2010 : 19:00:23
|
| love the tree root! Just make sure the lid gives enough air, and is unescapable from!! |
 
1.0.0 - Gobo - Snow Corn (RIP)
0.1.0 - Sprockett - Normal/hypo/het snow Corn
2.0.0 Anery Hatchlings
0.1.0 Amel Hatchling
0.1.0 Normal Hatchling
*Location - Southampton, UK*
http://www.weneedcake.co.uk |
|
|
|
misspiggy18
Hatchling
United Kingdom
143 Posts |
Posted - 24/05/2010 : 19:06:35
|
| i know the snake will escape from the viv becuase i can lift the lid with a couple of fingers but i love the lid as it has a light in the top but what modifications would you suggest id make |
2.0.0 corn snakes (Vinnie and Leo)
1.1.0 cats ( jayda and thomas)
|
|
|
|
Mouse
Yearling
United Kingdom
958 Posts |
Posted - 24/05/2010 : 19:24:53
|
air holes (big enough for air in, but small enough for no snake out), and some way of making sure the snake can't push it off. they're strong little things, and very clever when it comes to escaping.
I wouldn't use anything sticky, as if you snake does escape, it runs the risk of damaging itself on the glue.
Personally, I'd make a rope rig or something like that. (was gonna say bungee, but someone will point out it stretches.....) |
1.0.0 - Gobo - Snow Corn (RIP)
0.1.0 - Sprockett - Normal/hypo/het snow Corn
2.0.0 Anery Hatchlings
0.1.0 Amel Hatchling
0.1.0 Normal Hatchling
*Location - Southampton, UK*
http://www.weneedcake.co.uk |
|
|
|
Kehhlyr
ǝʞɐɔ sǝʌoן
United Kingdom
8173 Posts |
Posted - 24/05/2010 : 19:27:44
|
I have a possible way for you to make sure the lid is escape proof. I use it on 2 of my fishtank/vivs and have yet had an escape.
I shall post piccys in a sec when I find my wire.
I have got these ebay link which I have one going around the front of hissles viv (left red mark) and the other is sideways around Hissles Viv (right hand red mark).
Both vivs were fishtanks, hissles still uses the original fish tank lid, but lashed down. Marshys has a bit of wood cut to size that's lashed down.
Sorry for poor piccys, the vivs aren't at home at the moment and all my lovely reps are a few miles from me and are still in the process of moving. 
The box on top of hissles tank is not normally there.  |
-=Kehhlyr - The Resident Loon
|
Edited by - Kehhlyr on 24/05/2010 19:56:13 |
|
|
|
misspiggy18
Hatchling
United Kingdom
143 Posts |
Posted - 24/05/2010 : 21:28:33
|
| i love the idea of the straps it will so so much money ill have to get a couple as the lid is quite round lol |
2.0.0 corn snakes (Vinnie and Leo)
1.1.0 cats ( jayda and thomas)
|
|
|
|
Kehhlyr
ǝʞɐɔ sǝʌoן
United Kingdom
8173 Posts |
Posted - 24/05/2010 : 22:50:40
|
I got my straps from wilkos, £2.50 for a pair.
When you get them try them on in different ways and then try to lift all parts of the lid to see if any section raises up.
I run the rule that if I can get the tip of my finger in, then a snake can get out.
Get a small dremel/drill of some kind as well and put a few holes on each side of the lid for ventilation as well, otherwise you'll get condensation in there.
I had mine set up ready for the snakes for as long as possible before I put the snakes in, I was even putting water in the water bowl to make sure it wouldn't get to humid. |
-=Kehhlyr - The Resident Loon
|
|
|
|
misspiggy18
Hatchling
United Kingdom
143 Posts |
Posted - 24/05/2010 : 23:17:43
|
| thanx kehhlyr i pretty much live in wilkos at the moment i was planning on puting on on each side but was wondering would the starps effect the heat mat im gonna use |
2.0.0 corn snakes (Vinnie and Leo)
1.1.0 cats ( jayda and thomas)
|
|
|
|
Sta~ple
qeeun speler
United Kingdom
6129 Posts |
Posted - 25/05/2010 : 09:37:52
|
| I love the tree root hide! You'r so lucky! |
   
A very special super, duper thanks for K :3 |
|
|
|
Kehhlyr
ǝʞɐɔ sǝʌoן
United Kingdom
8173 Posts |
Posted - 25/05/2010 : 09:38:30
|
That's an issue I haven't come across I'm afraid as I have a thin layer of polystyrene under the vivs as well, so the straps also hold the polystyrene up tight against the heat mat, which in turn holds the heat mat against the viv.
It can be an advantage as breaking a small amount of polystyrene out can leave a lovely small gap for the stat probe to go outside the viv without interfering with how the glass tank sits on something.
Infact on marshys viv you can see the layer of polystyrene under the glass tank. |
-=Kehhlyr - The Resident Loon
|
|
|
|
Kellog
the nice one
United Kingdom
7308 Posts |
Posted - 26/05/2010 : 05:00:23
|
I know nothing about using fish tanks for snakes, but Kehhlyr is the one to help Amy  !
I just want to say how great it is that this lot just 'landed in your lap', hopefully saving you a few quid and allowing you to spend it on what is really important.
And that tree root is a fantastic shape (just make sure there are no sharp edges that your snake can scratch itself on).
xxx
|
  
  |
|
|
|
misspiggy18
Hatchling
United Kingdom
143 Posts |
Posted - 26/05/2010 : 20:06:31
|
| i love the root to i can imagine something simalier being quite expensive so joy i got it for free lol theres a hole in the middle for snakie to slide through and explore xD just got to wait till september to get snakie |
2.0.0 corn snakes (Vinnie and Leo)
1.1.0 cats ( jayda and thomas)
|
|
|
| |
Topic |
|
possible glass viv
