The Corn Snake Forum
The Corn Snake Forum
Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Corn Snake Posts
 General Posts
 LED lights
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

Red123
Fully Grown Corn

United Kingdom
2030 Posts

Posted - 13/07/2012 :  12:37:45  Show Profile  Reply with Quote
Who uses these http://www.ikea.com/gb/en/catalog/products/00202324/
I want to know what size hole has to be drilled to push the wire through? I'm assuming that each strip is pushed into the connector box if that make sense. My vivs are solid backed so I can't take the back off and make a grove like you could with hardboard backed vivs. Also is the wire length from each strip to the connector 3m? If not what length is it? Also how do you attach them to the viv, are they self adhesive? Is it strong enough to keep them in place?
Hoping to use a couple of sets of these to light all my vivs.
Thanks

Corn Snake
, 1.0.0 Amel (Stan),

Royal Pythons
1.0.0 Normal (Nigel)

1.0.0 Albino (Tony)
Boa Constrictor Imperator
0.1.0 (Agatha)
Western Hognose
0.1.0 Normal (Stevie)

0.0.1 Schneider Skink (George)
1.0.0 Extreme Blonde Harlequin Crested Gecko (Bert)
4 GALS.

Tarantulas
Red Rump (B. Vagans) Jo.
Chaco Golden Knee (G. pulchripes) Charlie, Greenbottle Blue (C. cyaneopubescens) Gus, Honduran Curly Hair ( B. albopilosum) Titch, Mexican Fire Leg (B. boehmei), Salmon Pink Bird Eater(L. parahybana), Fort Hall Baboon (P. Lugardi) Blanche, Stout Leg Baboon (E. Pachypus) Graham, Chilean Rose (G. Rosea) Glen.



Border collie x (BoB), 2 Cats (Lucky & Dip), 17 Goldfish, and The Dubia Family

coxymk2
Sub Adult

United Kingdom
1245 Posts

Posted - 13/07/2012 :  13:24:32  Show Profile  Reply with Quote
Fitted a set between 2 vivs yesterday. I used 2 sections together in each viv. They come with metal spring clips that you fasten to inside of viv. Took the lids off for cable but if unable they are about a quarter of an inch at each end. The cables are 3mtrs long . 4 cables ,1 block for cables to go into 1 transformer and an on/off switch mid mains cable. They are a bit fiddly but well worth it

0.0.1 ANERY (Liquorice)
0.0.1 CAROLINA (Bangle)
0.0.1 AMEL (Boozer)
Go to Top of Page

Hissyfit
Fully Grown Corn

United Kingdom
2214 Posts

Posted - 13/07/2012 :  14:03:07  Show Profile  Reply with Quote
I have the Ledberg LED strip in the vivs, and trying to fit the clip into the viv was a nightmare as the screws were really tiny. I ended up using superglue, just a tiny bit, and it held them in perfectly

Go to Top of Page

Hanxa
Egg

United Kingdom
54 Posts

Posted - 13/07/2012 :  21:52:17  Show Profile  Reply with Quote
I used these ones: http://www.argos.co.uk/static/Product/partNumber/9258420/c_1/1%7Ccategory_root%7CHome+and+furniture%7C14417894/c_2/2%7C14417894%7CLighting%7C14418021/Trail/searchtext%3ELED.htm

The drill bit I used to get the wires out was 8mm - was a little tight getting the mini plugs that go into the adaptor out.

1.0.0 Carolina - Aspen
1.0.0 Charcoal - Shadow
Go to Top of Page

Okeetee Mick
Fully Grown Corn

United Kingdom
2308 Posts

Posted - 13/07/2012 :  23:00:57  Show Profile  Reply with Quote
quote:
Originally posted by coxymk2

Fitted a set between 2 vivs yesterday. I used 2 sections together in each viv. They come with metal spring clips that you fasten to inside of viv. Took the lids off for cable but if unable they are about a quarter of an inch at each end. The cables are 3mtrs long . 4 cables ,1 block for cables to go into 1 transformer and an on/off switch mid mains cable. They are a bit fiddly but well worth it


Same here, use in all my 3ft vivs, two sections are just right and as you say well worth it.

0.1.0 Okeetee (Sookie) 0.1.0 Powder (Luna) 0.1.0 Bloodred (Arlene) 0.1.0 Caramel Stripe (Tara)
0.1.0 Ghost (Crystal) 0.1.0 Caramel (Jessica) 0.1.0 Lavender Stripe (Portia) 1.0.0 Platinum (Godric)
0.1.0 Thayers King (Lettie Mae) 0.1.0 Albino Blairs King (Lorena) 0.1.0 Russian Ratsnakes (Pam)
0.1.0 Korean Ratsnake (Katerina) 1.0.0 Russian Ratsnake (Lafayette)
Go to Top of Page

viraleye
Yearling

United Kingdom
695 Posts

Posted - 14/07/2012 :  10:51:32  Show Profile  Reply with Quote
I use these(but just the white ones) and i found that three was too bright so im now jyst using one of them

1.0.0 Cyrus - Amel het Anery ph Hypo - CURRENTLY AWOL
0.1.0 Diamond - Avalanche ph Charcoal, Hypo
1.0.0 Garland - Bloodred het Hypo
1.0.0 Pinball - Carolina
0.1.0 Casey - Hypo Lavender Stripe het Amel
0.0.1 - No Name Yet - Crested Gecko
Go to Top of Page

a2c7
Hatchling

United Kingdom
320 Posts

Posted - 14/07/2012 :  20:16:49  Show Profile  Reply with Quote
I have those exact ones and the wires are flat. They therefore fit easily through the holes that're provided in the back of a vivexotic, and help to fill them up a bit as well. We use all four of the lights in our 4ft VXs.

We like the opportunity to change the colours as well, and the snakes actually seem to prefer coming out under certain coloured lights (my boa is a right girly girl and likes a soft pink)

Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
The Corn Snake Forum © 2000-11 thecornsnake.co.uk Go To Top Of Page
Snitz Forums 2000