| T O P I C R E V I E W |
| ScalySituation |
Posted - 26/08/2011 : 12:41:56
Hiya, i've got the faun all set for my snake if all goes well i should bring her home tomorrow, the thing is I can't regulate the temp at the hot end above 27.7 degrees c is this alright or shall i try and get it up further if so, how would i do this? tape up some of the air holes maybe?  |
| 14 L A T E S T R E P L I E S (Newest First) |
| thistle |
Posted - 27/08/2011 : 21:00:36
Glad to hear that you got everything sorted. |
| tordyjo |
Posted - 26/08/2011 : 22:53:34
pleased you got your temps sorted |
| kdlang |
Posted - 26/08/2011 : 22:41:01
Glad it's all sorted now. I actually put cardboard underneath my heatmats to protect my wooden dresser from the heat. |
| ScalySituation |
Posted - 26/08/2011 : 14:56:36
thanks :) for some reason my fone puts pics in a weird format so i cant post them, will borrow mums fone so u guys can see what a little stunner she is |
| andys |
Posted - 26/08/2011 : 14:55:34
quote:
Originally posted by ScalySituation
all done, the temp now ready 28.6 thanks soooo much guys, pics of sonny tomorrow!!
Good news - and good luck with your new snake.
If you are anything like i was you'll be paranoid and watching that thermometer like a hawk for a bit :) (Not that its a bad thing) |
| ScalySituation |
Posted - 26/08/2011 : 14:26:23
all done, the temp now ready 28.6 thanks soooo much guys, pics of sonny tomorrow!! |
| ScalySituation |
Posted - 26/08/2011 : 14:22:34
ok ta for info, i shall go do it now :) |
| andys |
Posted - 26/08/2011 : 13:42:54
Cardboard is a good insulator so that probably explains your problem.
After having a heatmat under a faun for months i noticed the tiniest smallest amount of effect in the plastic over all that time, its just not hot enough to cause a problem.
Stick the faun on the mat, if it was anything like mine it will have a small air gap between the two (the faun will prob have small feet). Fix the thermostat probe to the floor on the inside of the faun.
Also, if you will be using substrate stick that in now too - basically as it will be, minus the snake. |
| ScalySituation |
Posted - 26/08/2011 : 13:35:14
yep, cos its only a plastic faun and didnt wanna risk direct heat contact |
| kdlang |
Posted - 26/08/2011 : 13:27:29
Do you mean the cardboard is in between the heatmat and the faun? |
| ScalySituation |
Posted - 26/08/2011 : 13:12:53
yah i do, but the thing is theres the heat mat on the surface, then theres the spacers and a sheet of cardboard to elevate the faun slightly is this ok?? |
| andys |
Posted - 26/08/2011 : 13:03:37
Assume the heat mat is under the faun, thermostat probe inside the faun ? (You do have a thermostat?) |
| tordyjo |
Posted - 26/08/2011 : 13:02:43
have you tried turning the thermostat up just a tiny little bit - about a mm of a turn at a time and see if this adjusts your temp.
bet you can't wait till tomorrow |
| ScalySituation |
Posted - 26/08/2011 : 12:51:41
this is pretty important so replies greatly valued
|
