| T O P I C R E V I E W |
| jordy845 |
Posted - 09/05/2011 : 14:46:36
hey guys, iv seen in some faun pictures that some people have a thin layer of polystyrene with the heat mat ontop of that, and then the faun over that with a small gap inbetween.
just wondering if it is better to have it this way, and does it matter if there is a gap between the heat mat and bottom of the faun?
sorry for all the constant questions, just want to make sure i get everything right for Chihiro 
thank you  |
| 3 L A T E S T R E P L I E S (Newest First) |
| jordy845 |
Posted - 09/05/2011 : 16:55:24
ahh righty i see :) should all be good then :) thankyou |
| Invalid User |
Posted - 09/05/2011 : 16:03:15
quote:
Originally posted by HannahB
you can, personally i had the desk, the heatmat with stat probe on and then the faun with the thermometer probe inside roughly directly on top of the stat probe and held down with a hide
i dont think it makes much difference, i just adjust the stat so that the thermometer probe reads the ideal temp - mine are around 29'c
Yup, thats also exactly what I did when I used a faun  |
| HannahB |
Posted - 09/05/2011 : 15:59:43
you can, personally i had the desk, the heatmat with stat probe on and then the faun with the thermometer probe inside roughly directly on top of the stat probe and held down with a hide
i dont think it makes much difference, i just adjust the stat so that the thermometer probe reads the ideal temp - mine are around 29'c |
|
|
