| T O P I C R E V I E W |
| Hissyfit |
Posted - 13/09/2011 : 16:52:06
We've just built a Vivexotic and noticed the plastic vents pop out way too easy! I have 'No More Nails', would that glue them in ok, or do I need something else to make sure they are properly fixed in place? Thanks |
| 7 L A T E S T R E P L I E S (Newest First) |
| Spreebok |
Posted - 14/09/2011 : 22:20:25
Yeah, I popped them in from the inside too, no worries there! :> |
| Hissyfit |
Posted - 14/09/2011 : 10:58:28
Thanks, I'll go for both silicone & nails to be on the safe side :-)I was leaving them fitted on the outside, but think I'll change that before making them a permanent fixture :-) |
| a33272 |
Posted - 13/09/2011 : 19:09:46
you can also take them in with nails |
| gingerpony |
Posted - 13/09/2011 : 18:47:13
make sure you apply a liberal amount......we were using up the last of a tube and didn't put a lot on and subsequently the snake managed to pop the vent (into the viv) and escape!
(but was found on it's way down the stairs!) |
| Kehhlyr |
Posted - 13/09/2011 : 18:26:25
Also are you putting the vents into place from the inside or outside??
I put my vents through from the inside, that way if they push all they're doing is forcing them further in. |
| Hissyfit |
Posted - 13/09/2011 : 17:51:16
Oh good, I've got some in to seal it so will use that then. Thanks :-) |
| gingerpony |
Posted - 13/09/2011 : 17:35:45
aquarium silicone sealant  |
